--- title: "Create a virtual Trellix SIEM device on the AWS image" slug: "create-a-virtual-trellix-siem-device-on-the-aws-image-1" tags: ["ESM"] updated: 2026-09-12T21:25:00Z published: 2026-09-12T21:25:00Z canonical: "docs.trellix.com/create-a-virtual-trellix-siem-device-on-the-aws-image-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a virtual Trellix SIEM device on the AWS image Use an AWS machine image to create a Trellix SIEM device. - Determine the number of cores and amount of memory needed for the new device. - Run the installation script on the temporary Linux server. 1. On the AWS console, click **Launch a virtual machine**. 2. On the **Choose AMI** tab, select an instance type with sufficient cores and memory to run the device. Device specification sheets can help you determine the requirements. 3. On the **Choose Instance Type** tab, select **m4.2xlarge** and set the **Network** and **Subnet**. 4. On the **Configure Instance** tab, configure the machine. 5. On the **Add Storage** tab, select a **Volume Type** and set **Size**. 6. On the **Configure Security Group** tab, select a network security group. 7. Click **Review and Launch**. 8. Select a key pair and click **Launch Instances**. 9. On the AWS console, select **Instances** then select the new instance. 10. Click in the **Name** column and type a name. 11. From the left navigation menu, select **Security Groups**. 12. Enable HTTPS, HTTP, and SSH. 13. Click **Connect** and follow the instructions to log on to the new device using a web browser. ### Note Disabling the DHCP setting on an AWS VM deployment is not supported. Request a static DHCP address, if a permanent IP address is needed. :