--- title: "Create connection isolation groups on a client system" slug: "create-connection-isolation-groups-on-a-client-system-1" tags: ["Product Usage", "ENS 26.x", "Endpoint Security"] updated: 2026-09-14T19:35:23Z published: 2026-09-14T19:35:23Z canonical: "docs.trellix.com/create-connection-isolation-groups-on-a-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create connection isolation groups on a client system A connection isolation firewall rule group instructs Firewall to process only traffic that matches the defined connection type and group criteria. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Firewall** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f(1).png?sv=2026-02-06&spr=https&st=2026-11-22T16%3A44%3A47Z&se=2026-11-22T17%3A44%3A47Z&sr=c&sp=r&sig=Jge4bsn4LXUuvae98%2FSzHG0dfBy%2Fd%2Bv7dQpN2eFItvQ%3D), select **Settings**, then click **Firewall** on the **Settings** page. 3. Under **RULES**, click **Add Group**. 4. Under **Description**, specify options for the group. 5. Under **Location**, select **Enable location awareness** and **Enable connection isolation**. Then, select the location criteria for matching. 6. Under **Networks**, for **Connection types**, select the type of connection (**Wired, Wireless, or Virtual**) to apply to the rules in this group. > [!NOTE] > Note > > Settings for **Transport** and **Executables** aren't available for connection isolation groups. 7. Click **OK**. 8. Create new rules within this group, or move existing rules into it from the firewall rule list. 9. Click **Apply**.