--- title: "Create Expert Rules for registry on client system" slug: "create-expert-rules-for-registry-on-client-system-1" tags: ["Product Usage", "ENS 26.x", "Endpoint Security"] updated: 2026-09-14T19:35:16Z published: 2026-09-14T19:35:16Z canonical: "docs.trellix.com/create-expert-rules-for-registry-on-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create Expert Rules for registry on client system You can create Expert rules directly on a client system or self-managed endpoints that aren't managed by ePO. > [!NOTE] > Note > > Exploit Prevention is not supported in the ARM architecture. ### Before you begin Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the client system as administrator. ### Task 1. Launch the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu **✓**, select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. Click **Show Advanced**. 4. In the **Signatures** section: - Create a rule — Click **Add Expert Rule**. - Edit an existing user-defined rule — Double-click the rule in the table. 5. In the **Expert Rule Checker** page, complete the fields. Trellix ENS assigns the ID number automatically starting with 20000. 1. Select the severity and action for the rule. The severity provides information only; it has no effect on the rule action. 2. Select **Registry** in the Rule Type drop-down list. 3. Add the rule code to the **Rule content** field. 6. Save the rule, then save the settings. 7. Validate the new Expert Rule on the client system.