--- title: "Create SNMP traps as alarm actions" slug: "create-snmp-traps-as-alarm-actions" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:32Z published: 2026-09-12T21:19:32Z canonical: "docs.trellix.com/create-snmp-traps-as-alarm-actions" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create SNMP traps as alarm actions Send SNMP traps as an alarm action. Prepare the SNMP trap Receiver (only needed if you don't have an SNMP trap Receiver). 1. Create an SNMP profile to tell Trellix ESM where to send the SNMP traps. 1. From the Trellix ESM dashboard, click ![menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-19ebda16-d92c-19de-227c-dea192740a66(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A13%3A07Z&se=2026-11-22T15%3A13%3A07Z&sr=c&sp=r&sig=sxXPbu2FwGiXlqPbcxyXQQYVdrqdEEMws93nRX5fzYs%3D) and select **More Settings**. 2. On the system navigation tree, select Trellix ESM and click ![Settings.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8b505257-d315-b266-3dba-6fbedf9e9d28(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A13%3A07Z&se=2026-11-22T15%3A13%3A07Z&sr=c&sp=r&sig=sxXPbu2FwGiXlqPbcxyXQQYVdrqdEEMws93nRX5fzYs%3D). 3. Click Profile Management → Add. 4. Select **SNMP Trap** for the **Profile Type**. 5. Enter the remaining fields and click **OK**. 2. Configure SNMP on Trellix ESM. 1. On the **System Properties** page, click SNMP Configuration → SNMP Traps. 2. Select the **Trap Port** and **Send** fields to send the types of traps. 3. Select the added profile under **Destinations**. 4. Click Apply → OK. 3. Define an alarm with **SNMP Trap** as an action. 1. On the **System Properties** page, click Alarms → Add. 2. Enter the information needed on the **Summary**, **Condition** and **Devices** tabs, selecting **Internal Event Match** for the **Type**. 3. Click **Actions** tab and select Send Message → Configure. 4. To select or create a template for SNMP messages: - Select **Basic SNMP Template** from the **SNMP** list. or - Click **Templates** and select an existing template. or - Click **Add** to define a new template. 5. On the **Alarm Settings** page, continue with the alarm setup and click **Finish**.