--- title: "Create timed groups on a client system" slug: "create-timed-groups-on-a-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:14Z published: 2026-09-14T20:39:14Z canonical: "docs.trellix.com/create-timed-groups-on-a-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create timed groups on a client system You can create Firewall timed groups to restrict Internet access until a client system connects over a VPN. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Firewall** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-22T21%3A37%3A22Z&se=2026-11-22T22%3A37%3A22Z&sr=c&sp=r&sig=i3fOexhiG8uO9A2zMj7fQRvnw6Zg51bJxn6%2B7Xr2Kgs%3D), select **Settings**, then click **Firewall** on the **Settings** page. 3. Create a Firewall group with default settings that allow Internet connectivity. For example, allow port 80 HTTP traffic. 4. In the **Schedule** section, select how to enable the group. - **Enable schedule** — Specifies a start and end time for the group to be enabled. - **Disable schedule and enable the group from the Trellix system tray icon** — Allows users to enable the group from the Trellix system tray icon and keeps the group enabled for the specified number of minutes. If you allow users to manage the timed group, you can optionally require that they provide a justification before enabling the group. 5. Click **OK** to save your changes. 6. Create a connection isolation group that matches the VPN network to allow needed traffic. > [!TIP] > Tip > > **Best practice:** To allow outbound traffic from only the connection isolation group on the client system, don't place any Firewall rules below this group. 7. Click **Apply**.