--- title: "Create UCAPL alarms" slug: "create-ucapl-alarms-1" tags: ["ESM"] updated: 2026-09-12T21:25:00Z published: 2026-09-12T21:25:00Z canonical: "docs.trellix.com/create-ucapl-alarms-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create UCAPL alarms Create alarms that meet Unified Capabilities Approved Products List (UCAPL) requirements. 1. Create an **Internal Event Match** alarm matching on **Signature ID** for specific triggers: - When multiple failed logons for the same user reach an adjustable threshold, set the value to `306-36`. - When a user account is locked due to reaching the no activity threshold, set the value to `306-35`. - If a user tries to log on to the system after reaching the number of allowed concurrent sessions, set the value to `306-37`. - When a system file integrity check fails, set the value to `306-50085`. - When common access card (CAC) or web server certificates are about to expire set the value to `306-50081`, `306-50082`, `306-50083`, or `306-50084`. ### Note The alarm triggers 60 days before the certificate expires, then on a weekly basis. You cannot change the number of days. 2. Configure an SNMP trap so that the alarm sends a trap to the NMS when it detects that the system is no longer operating in an approved or secure state. 1. Create an alarm matching on any condition, then click Actions tab → Send Message. 2. Click Add Recipients → SNMP, select the recipient, then click **OK**. 3. Click Send Message → Configure → Templates → Add. 4. Select **SNMP Template** for **Type** field and enter the text for the message, then click **OK**. 5. On the **Template Management** page, select the new template and click **OK**. 6. Complete the remaining alarm settings. 3. Configure a syslog message so that the alarm sends a syslog message to NMS when it detects that the system is no longer operating in an approved or secure state. 1. Create an alarm matching on any condition, then click Actions tab → Send Message. 2. Click Add Recipients → Syslog, select the recipient and click **OK**. 3. In the **Send Message** field, click Configure → Templates → Add. 4. Select **Syslog Template** for **Type** field and enter the text for the message, then click **OK**. 5. On the **Template Management** page, select the new template, then click **OK**. 6. Complete the remaining alarm settings. 4. Configure an SNMP trap so that the alarm notifies the appropriate Network Operations Center (NOC) in 30 seconds if a security log fails to record required events. Trellix ESM sends SNMP traps to the SNMP profile recipient with the message Failed to write to the security log. 1. Select System Properties → SNMP Configuration → SNMP Traps or device Properties → device Configuration → SNMP. 2. Select the **Security Log Failure Trap** to configure one or more profiles for the traps to be sent to, then click **Apply**. 5. Configure an SNMP trap so that the alarm notifies when the audit functions (such as the database, cpservice, IPSDBServer) start or shut down. 6. Select **SNMP traps** or **SNMP Settings** and click **Database Up/Down Traps**. 7. Configure one or more profiles for the traps to be sent to and click **Apply**. 8. Trigger an alarm when an administrative session exists for each of the defined administrative roles. 1. Create an **Internal Event Match** alarm matching on **Signature ID**. 2. Enter the **Values** for: - Audit Administrator - `306–38` - Crypto-Administrator - `306–39` - Power User - `306–40` :