--- title: "Define networks to use in rules and groups" slug: "define-networks-to-use-in-rules-and-groups-1" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:14Z published: 2026-09-14T20:39:14Z canonical: "docs.trellix.com/define-networks-to-use-in-rules-and-groups-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Define networks to use in rules and groups You can define network addresses, subnets, or ranges to use in rules and groups, or define networks as trusted. **Task** 1. Select **Menu** → **Policy** → **Policy Catalog**, then select **Endpoint Security Firewall** from the **Products** list in the left pane. 2. From the **Category** list in the right pane, select **Options**. 3. Click the name of an editable policy. 4. Click **Show Advanced**. 5. Under **Defined Networks**, click **Add Defined Network**. 6. Select the type from **Address type**, then enter a trusted IP address, subnet, or range in the **Address** field. 7. Select either **Trusted** or **Not trusted** from the drop-down menu. - **Trusted** — Firewall allows all traffic to and from trusted networks. - **Not trusted** — Defines networks for use in rules and groups. You can use networks defined as not trusted for the local or remote network criteria in a rule or group. Defining a network as not trusted adds those networks as exceptions to Trellix GTI rules in Firewall and excludes those networks from a Trellix GTI lookup. 8. Click **Save**.