--- title: "Define networks to use in rules and groups on a client system" slug: "define-networks-to-use-in-rules-and-groups-on-a-client-system-1" tags: ["Product Usage", "ENS 26.x", "Endpoint Security"] updated: 2026-09-14T19:35:08Z published: 2026-09-14T19:35:08Z canonical: "docs.trellix.com/define-networks-to-use-in-rules-and-groups-on-a-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Define networks to use in rules and groups on a client system You can define network addresses, subnets, or ranges to use in rules and groups, or define networks as trusted. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Firewall** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f(1).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A41%3A10Z&se=2026-11-22T16%3A41%3A10Z&sr=c&sp=r&sig=lfNnVFbcVsTCnK5MVwGRExdX0pA7CBEMseheq4vejJ0%3D), select **Settings**, then click **Firewall** on the **Settings** page. 3. Click **Show Advanced**. 4. From **Defined Networks**, do any of the following: | To... | Steps | | --- | --- | | Define a network. | Click **Add** and enter the details for the trusted network. From the drop-down list: - Select **Yes** to define the network as trusted. Firewall allows all traffic to and from trusted networks. - Select **No** to define the network for use in rules and groups. You can use networks defined as not trusted for the local or remote network criteria in a rule or group. Defining a network as not trusted adds those networks as exceptions to Trellix GTI rules in Firewall and excludes those networks from a Trellix GTI lookup. | | Change a network definition. | For each column, double-click the item and enter the new information. | | Delete a network. | Select a row, then click **Delete**. | 5. Click **Apply** .