--- title: "Deploying Endpoint Security (HX) in Nutanix" slug: "deploying-endpoint-security-hx-in-nutanix" tags: ["HX 11.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:49:39Z published: 2026-09-10T15:49:39Z canonical: "docs.trellix.com/deploying-endpoint-security-hx-in-nutanix" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deploying Endpoint Security (HX) in Nutanix #### This section describes how to deploy Endpoint Security (HX) in Nutanix Before you begin: - Nutanix Version: pc.2022.6.0.10 - NCC Version: 4.6.0 - LCM Version: 2.4.3.1 Deploy Endpoint Security (HX) in Nutanix 1. Log on to **Prism Central** with administrator privileges using port 9440. For example, `https://<ip address>:9440/console/#` 2. Upload and deploy Endpoint Security (HX)I in the Nutanix AHV platform: 1. Select ![IVX_OVA_menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-221b90b2-6ea9-5227-5881-46b570a7d3f6(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A35Z&se=2026-11-20T12%3A08%3A35Z&sr=c&sp=r&sig=DTIIp6UeVWK%2Fqbb6btkYwiukrNymraYECxHcVgomfdI%3D) → Compute & Storage → HX, then click **Upload HX**. 2. Go to the location where the HX file is stored on your local folder, then select the **HX** file. The message **Upload of the file is successfully completed** is displayed. After the upload is complete, the IVX OVA file is listed in the table. 3. Select the checkbox of the HX file that you want to deploy. ![IVX_OVA_file_selection.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8a218cd9-24d1-5db5-064d-4f3a958bcdab(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A35Z&se=2026-11-20T12%3A08%3A35Z&sr=c&sp=r&sig=DTIIp6UeVWK%2Fqbb6btkYwiukrNymraYECxHcVgomfdI%3D) 4. Select **Deploy as VM** from Actions drop-down. 5. In the **Deploy as VM** page, specify the following details of the VM: - **Name**: The name of the VM to be deployed. ### Important Ensure that each VM has a distinct name that follows the Nutanix VM naming guidelines. - **Description**: The description for the VM. - **VM Properties**: Enter the following details that are appropriate for the model: 1. CPU 2. Cores per CPU 3. Memory The appropriate specifications for your model may be obtained from the following tables: ### Note Nutanix currently supports Endpoint Security (HX) models 2502, 4502, and 4600. Virtual cloud and server features | Model | CPU | Cores per CPU | Memory | | --- | --- | --- | --- | | HX 2502DV | 4 | 1 by 4 | 64 GB | | HX 2502V | 4 | 2 by 4 | 64 GB | | HX 4502DV | 8 | 2 by 4 | 64 GB | | HX 4502V | 8 | 2 by 4 | 64 GB | | HX 4600DV | 8 | 2 by 4 | 64 GB | | HX 4600V | 6 | 2 by 4 | 16 GB | 6. Click Next. 7. Specify the Network subnet details in the Resources page and then click Next. 3. Review the settings in the Review page and then click **Create VM**. 4. Launch the VM: 1. Select ![IVX_OVA_menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-221b90b2-6ea9-5227-5881-46b570a7d3f6(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A35Z&se=2026-11-20T12%3A08%3A35Z&sr=c&sp=r&sig=DTIIp6UeVWK%2Fqbb6btkYwiukrNymraYECxHcVgomfdI%3D) → Compute & Storage → VMs, then click **VMs**. 2. Enable virtualization for Nutanix instances using CLI. Virtualization is not enabled by default. You must enable virtualization for Guest images to function. ### Important Make sure to power off the guest VM on which you want to configure nested virtualization. Perform the following steps to enable virtualization: 1. Log in to any Controller VM in the cluster with SSH. 2. Run the following command to enable the guest VM: `nutanix@CVM~$acli vm.update <VM_name> hardware_virtualization=true` 3. Retrieve the guest VM details using the following command to check whether all the attributes are correctly set for the guest VM: `nutanix@CVM~ $ acli vm.get <VM_name>` 4. Review the following log attributes to verify whether the infrastructure to support WSL2 is configured successfully in the guest VM: `hardware_virtualization: True` 3. From the list of VMs, select the deployed VM and click the Actions drop-down, then click **Power On** to launch the VM. The VM might take 7-8 mins to launch and display the login page. 5. Once the login prompt appears in the VM console, enter **admin**. 6. At the password prompt, enter **admin**. ![IVX_Activation1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b2bfc7d9-2833-8b78-6096-970fa6ad73a7(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A35Z&se=2026-11-20T12%3A08%3A35Z&sr=c&sp=r&sig=DTIIp6UeVWK%2Fqbb6btkYwiukrNymraYECxHcVgomfdI%3D) 7. If prompted to change the password, configure a new password using the` username admin password <new password> `command. You will be logged out. Log in again with the new password. ![IVX_Activation2.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d4fa003b-1d29-7caf-9b21-e3995779794d(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A35Z&se=2026-11-20T12%3A08%3A35Z&sr=c&sp=r&sig=DTIIp6UeVWK%2Fqbb6btkYwiukrNymraYECxHcVgomfdI%3D) 8. On logging in again, select **Yes** to accept License Agreement. 9. Select **Yes** if prompted to use the wizard for initial configuration. 10. If you do not receive the above prompt, start the configuration jump-start wizard: `hostname (config) # configuration jump-start` 11. Answer the wizard questions as described in Wizard steps. ### Wizard steps The following tables describe the questions the configuration wizard prompts you to answer. As noted in the table, the wizard skips some steps based on your answers to previous steps. The configuration wizard is typically used to perform the initial configuration of the system. See Initial configuration for information about running the wizard before the management interface is configured. After the management interface is configured, an administrator can use the `configuration jump-start` CLI command to run the wizard. ### Note Press Ctrl+C to exit the configuration wizard. After the management interface is configured, an administrator can use the `configuration jump-start` CLI command to run the wizard again. ### Intelligent Virtual Execution steps | Step | Response | | --- | --- | | Admin password? | (Optional) Enter a new administrator password. | | Confirm admin password? | Re-enter the new administrator password. | | Enable remote access for 'admin' user? | Enter **yes** to enable the administrator to log in to the appliance remotely. Enter **no** to disable remote access. | | Use DHCP on ether1 interface? | Enter **no** to manually configure your IP address and network settings. | | Use zeroconf on ether1 interface? | Enter **yes** to use zero-configuration (zeroconf) networking. Enter **no** to specify a static IP address and network mask. (If you specify **yes**, the next step is skipped.) **NOTE**: Do not use zeroconf on the primary interface. | | Primary IPv4 address and masklen? | Enter the IPv4 address for the management interface in A.B.C.D format and enter the network mask (for example, **1.1.1.2 /24**). | | Default gateway? | Enter the gateway IP address for the management interface. | | Primary DNS server? | Enter the IP address of the DNS server. | | Domain name? | Enter the domain for the management interface (for example, **it.acme.com**). | | Enable fenet service? | Enter **yes** to enable access to the DTI network. | | Enable fenet license update service? | Enter **yes** to enable the licensing service to automatically download your licenses from the DTI network and install them. (If licenses are downloaded and installed successfully, the wizard skips the step that prompts for the product license key and the step that prompts for the security-content updates key.) | | Sync appliance time with fenet? | Enter **yes** to synchronize the appliance time with the DTI server time. If you enabled the licensing service, synchronization prevents a feature from being temporarily unlicensed due to a time gap. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Update licenses from fenet? | Enter **yes** to download and install your licenses. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Enable NTP? | Enter **yes** to enable automatic time synchronization with one or more Network Time Protocol (NTP) servers. | | Enable IPv6 on management interface? | Enter **yes** to enable IPv6 protocol, which changes network IP routing from IPv4 to IPv6. (This step and the next two steps are skipped if you entered **yes** in the "Enable Incident Response or Compromise Assessment?" step. This step and the next two steps will be automatically performed if you entered **yes** in the "Enable FaaS VPN" step.) | | Enable IPv6 autoconfig (SLAAC) on ether1 interface? | Enter **yes** to enable IPv6 autoconfig on the ether1 (management interface) port. (This step is skipped if you entered **no** in the "Enable IPv6" step.) | | Enable DHCPv6 on ether1 interface? | Enter **yes** to use DHCPv6 to configure IPv6 hosts with IP addresses. (This step is skipped if you entered **no** in the "Use DHCP on ether1 interface" or "Enable IPv6" step.) | | Product license key? | in the "Enable fenet license update service?" step and if licenses were successfully installed as a result.)**yes**, or press Enter to install a 15-day evaluation license. (This step and the next step are skipped if you entered TrellixEnter the product license key you obtained from Enter the name of the interface. | | Send a request to be managed by CMS? | Enter **yes** if appliance needs to be managed by a Central Management System appliance else enter **no**. | :