--- title: "Device Guard policy configuration" slug: "device-guard-policy-configuration" updated: 2026-09-11T11:08:46Z published: 2026-09-11T11:08:46Z canonical: "docs.trellix.com/device-guard-policy-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Device Guard policy configuration The Device Guard module, when enabled, installs on specific host sets and can be configured to block USB devices currently belonging to two classes: - Mass Storage - Media Transfer Protocol (MTP) The policy currently allows a Trellix Endpoint admin to completely block a particular class of USB devices from the ones listed above. Additionally, an admin can then proceed to configure exemptions to the class-based policy and allow corporate issued USB devices to connect to Endpoints based on device characteristics such as Product Name, Vendor Name and Serial Number. To enable the Device Guard module from Endpoint Security Web UI: | ![Configuring_Device_Guard_module.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-111b008f-3c36-7a4e-3511-7764c77bd7f0.PNG?sv=2026-02-06&spr=https&st=2026-11-20T16%3A31%3A04Z&se=2026-11-20T17%3A31%3A04Z&sr=c&sp=r&sig=HbP5GUIActJDd2WLp3TZbV%2Fh8eGbyh%2Bt8yA1I7qzlJk%3D) | | --- | 1. Log in to the Endpoint Security Web UI as an administrator. 2. From the **Admin** menu, select **Policies** to access the policies page. 3. Click the **Create Custom Policy** button. This will bring up the **Create Policy** page. 4. On the **Create Policy** page, click the **Categories** button and select the **Device Guard** from the checkbox and click **Apply**. Once enabled, Trellix Endpoint admins can proceed to create a host set based policy selecting Device Guard 1.2.1 under categories. After filling the policy name and description, admins can then proceed to configure the class level access control for these devices. The class level access restrictions are applied to the entire host set where the policy is being enabled. The default setting for class level controls is to Allow both Mass Storage and MTP (Media Transfer Protocol) type of devices. :