--- title: "Disable On-Access Scan on a client system" slug: "disable-on-access-scan-on-a-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:07Z published: 2026-09-14T20:39:07Z canonical: "docs.trellix.com/disable-on-access-scan-on-a-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disable On-Access Scan on a client system On disabling the On-Access Scan, Trellix remains registered as your active antivirus in **Windows Security Center**. You might need to disable the On-Access Scan (OAS) during troubleshooting to determine if Endpoint Security is conflicting with a specific local application or to perform system maintenance that requires high disk I/O. > [!TIP] > Tip > > We recommend that you only disable On-Access Scan temporarily. For maximum protection, always keep On-Access Scan enabled in your production environment. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-21T07%3A27%3A50Z&se=2026-11-21T08%3A27%3A50Z&sr=c&sp=r&sig=JYBsb%2B0Vtym4LPaLxFYlG0XGcxZVVW5JaJK%2BLKwHW3o%3D), select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **On-Access Scan**. 5. Under **On-Access Scan**, select **Disable**. 6. Click **Apply**.