--- title: "Disabling MalwareGuard for Selected Host Sets" slug: "disabling-malwareguard-for-selected-host-sets" updated: 2026-09-08T19:11:22Z published: 2026-09-08T19:11:22Z canonical: "docs.trellix.com/disabling-malwareguard-for-selected-host-sets" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling MalwareGuard for Selected Host Sets To disable MalwareGuard for selected host sets. ### Note When you disable a setting in a custom policy, the setting is disabled for all host sets assigned to the policy. If you want select host sets to keep the original setting, you must create a new custom policy with the setting enabled and assign it to the selected host sets. [See Creating a Custom Policy](/docs/creating-a-custom-policy) for more information about using the Web UI to create a custom policy. 1. Log in to the Web UI as an administrator. 2. From the **Admin** menu, select **Policies** to access the **Policies** page. 3. In the Policies table, click the link for the custom policy you want to modify. 4. Select the **Malware Protection** tab. 5. In the Malware Detection section, toggle the **MalwareGuard** ON/OFF switch to **OFF**. ![Policy_MalProtect_MalGuard_Disable.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-449d815a-f148-9fd9-25f2-7aae25072e3d(1).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A02%3A29Z&se=2026-11-22T14%3A02%3A29Z&sr=c&sp=r&sig=kbK8koK5JxaYeODDg4o1INuRoE8NRF8sVLGzWe%2BV6hM%3D) 6. Click **Save**. :