--- title: "Enable and configure Firewall on a client system" slug: "enable-and-configure-firewall-on-a-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:03Z published: 2026-09-14T20:39:03Z canonical: "docs.trellix.com/enable-and-configure-firewall-on-a-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable and configure Firewall on a client system You can configure settings for Firewall to turn firewall protection on and off, enable Adaptive mode, and configure other Firewall options. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Firewall** on the main **Status** page. Or, from the **Action**menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-22T23%3A05%3A21Z&se=2026-11-23T00%3A05%3A21Z&sr=c&sp=r&sig=8rn419TtNk%2FTC8F39%2B2nQCACRRoQ318tk8b6Q3E1TVQ%3D), select **Settings**, then click **Firewall** on the **Settings** page. 3. Select **Enable Firewall** to make the firewall active and change its options. > [!NOTE] > Note > > Host Intrusion Prevention 8.0 can be installed on the same system as Endpoint Security version 10.7. If McAfee Host IPS Firewall is installed and enabled, Endpoint Security Firewall is disabled even if enabled in the settings. 4. Click **Show Advanced**. 5. Configure settings on the page, then click **Apply**.