--- title: "Enable and configure Host Intrusion Prevention" slug: "enable-and-configure-host-intrusion-prevention-1" tags: ["Product Usage", "ENS 10.7.x"] updated: 2026-10-07T18:17:09Z published: 2026-10-07T18:17:09Z canonical: "docs.trellix.com/enable-and-configure-host-intrusion-prevention-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable and configure Host Intrusion Prevention Defining a network as trusted causes Firewall to create an internal bi-directional Allow rule with remote network criteria set to the trusted network. Any traffic to and from the trusted networks is allowed. 1. Select **Menu** → **Policy** → **Policy Catalog**, then select **Endpoint Security Firewall** from the **Product** list. 2. From the **Category** list, select **Options**. 3. Click the name of an editable policy. 4. Select **Enable Firewall** to make the firewall active and change its options. > [!NOTE] > Note > > Host Intrusion Prevention 8.0 can be installed on the same system as Trellix ENS version 10.7. If McAfee Host IPS Firewall is installed and enabled, Trellix Endpoint Security (ENS) Firewall is disabled even if enabled in the settings. 5. From theActionmenu, selectAbout. 6. Configure settings on the page, then click **Save**.