--- title: "Enable and disable indicator rule aging using the Web UI" slug: "enable-and-disable-indicator-rule-aging-using-the-web-ui-1" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:17Z published: 2026-09-10T15:35:17Z canonical: "docs.trellix.com/enable-and-disable-indicator-rule-aging-using-the-web-ui-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable and disable indicator rule aging using the Web UI To enable or disable indicator rule aging using the Web UI: 1. Log in to the Endpoint Security (HX) Web UI. 2. Select **Aging Settings** on the **Configure** menu. The Aging Settings page appears. 3. To enable or disable the indicator rule aging using the Web UI: 1. To enable the indicator rule, specify an aging interval in the **Delete indicator when it's had no alerts for**: box in the Indicator and Alert box on the **Aging Settings** page. Valid values range from 1 through 365 days. This sets and enables the aging interval. 2. To disable the indicator rule, select the **No auto-deletion; I will delete indicator rules manually** option in the Indicator and Alert box on the **Aging Settings** page 4. Click **Save** to save your changes. ### Note To restore default settings, click **Reset to default**, and then click **Save**. If you click **Cancel**, Endpoint Security (HX) will return settings to the most recently saved values. :