--- title: "Enable the trigger threshold for Dynamic Application Containment on a client system" slug: "enable-trigger-threshold-dynamic-application-containment-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:03Z published: 2026-09-14T20:39:03Z canonical: "docs.trellix.com/enable-trigger-threshold-dynamic-application-containment-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable the trigger threshold for Dynamic Application Containment on a client system With *Dynamic Application Containment*, you can specify that applications with specific reputations run in a container, limiting the actions they can perform. If the application reputation is at or below the containment reputation threshold, the application is contained. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click Adaptive Threat Protection on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-22T20%3A23%3A05Z&se=2026-11-22T21%3A23%3A05Z&sr=c&sp=r&sig=8Gr465HwAaCPsAlJVEmIYG6arX17m%2FTljvOmyog7pCE%3D), select **Settings**, then click**Adaptive Threat Protection** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **Options**. 5. Verify that ATP is enabled. 6. Select **Trigger Dynamic Application Containment when reputation threshold reaches**. 7. Specify the reputation threshold at which to contain applications. - **Might Be Trusted** - **Unknown** (default for the **Security** rule group) - **Might Be Malicious** (default for the **Balanced** rule group) - **Most Likely Malicious** (default for the **Productivity** rule group) - **Known Malicious** The Dynamic Application Containment reputation threshold must be above the block and clean thresholds. For example, if the block threshold is set to **Known Malicious**, the Dynamic Application Containment threshold must be set to **Most Likely Malicious** or above. 8. Click **Apply**.