--- title: "Enabling automatic license updates using the CLI" slug: "enabling-automatic-license-updates-using-the-cli-1" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T17:37:59Z published: 2026-09-10T17:37:59Z canonical: "docs.trellix.com/enabling-automatic-license-updates-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling automatic license updates using the CLI When the license update feature is enabled, license updates are automatic. You can also explicitly update licenses. To verify and enable automatic license updates: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal                     ``` 2. Verify the license update feature status: ``` hostname (config) # show fenet license fenet License Update Service Licensing service: Administratively enabled Last time licensing service was contacted: 2014/08/11 10:50:04 Last time licensing service was contacted successfully: 2014/08/11 10:50:04 Last time keys from licensing service were applied: 2014/08/07 17:50:03 ``` 3. If the license update feature service is disabled, enable it: ``` hostname (config) # fenet license update enable                   ``` 4. Save your changes: ``` hostname (config) # write memory                     ``` ### Note See Synchronizing the System Clock to DTI Server Time Using the CLI "Synchronizing the System Clock to DTI Server Time Using the CLI" in the *Endpoint Security (HX) System Administration Guide* for an option that prevents potential licensing issues if there is a time gap between the two clocks. To explicitly update licenses: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal                     ``` 2. Update licenses: ``` hostname (config) # fenet license update                     ``` 3. Save your changes: ``` hostname (config) # write memory                     ``` To disable automatic license updates: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal                     ``` 2. Disable the feature: ``` hostname (config) # no fenet license update enable                     ``` 3. Save your changes: ``` hostname (config) # write memory                     ``` :