--- title: "Enabling MalwareGuard for Selected Host Sets" slug: "enabling-malwareguard-for-selected-host-sets" updated: 2026-09-08T19:11:22Z published: 2026-09-08T19:11:22Z canonical: "docs.trellix.com/enabling-malwareguard-for-selected-host-sets" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling MalwareGuard for Selected Host Sets To enable MalwareGuard for selected host sets: ### Note [See Creating a Custom Policy](/docs/creating-a-custom-policy) for more information about using the Web UI to create a custom policy. 1. Log in to the Web UI as an administrator. 2. From the **Admin** menu, select **Policies** to access the **Policies** page. 3. In the Policies table, click the link for the custom policy you want to modify 4. Select the **Malware Protection** tab. 5. In the Malware Detection section, toggle that the **MalwareGuard Detection** ON/OFF switch to **ON**. ![Policy_MalProtect_Enable.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0da5a4fa-9096-083d-489f-d95534a21907(1).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A13%3A12Z&se=2026-11-22T14%3A13%3A12Z&sr=c&sp=r&sig=kyd8ZifPx0rnC6ai3QrKkVcezbcwJUpFMXeobRAFWX0%3D) 6. Click **Save**. Now you can assign host sets to the custom policy and set the policy priority level. See [Assigning Host Sets to Agent Policies](/docs/assigning-host-sets-to-xagent-policies) and [Configuring Policy Priority Using the Web UI](/docs/configuring-policy-priority-using-the-web-ui) for more information. :