--- title: "Enabling strict and global host-key checking using the CLI" slug: "enabling-strict-and-global-host-key-checking-using-the-cli" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:24:36Z published: 2026-09-23T17:24:36Z canonical: "docs.trellix.com/enabling-strict-and-global-host-key-checking-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling strict and global host-key checking using the CLI Use the commands in this section to enable strict host-key checking, global host-key checking, or both. - With **strict host-key checking**, the connection will be allowed only if the local host-keys database for the remote user already has an entry that matches the key the Central Management System appliance sends. - With **global host-key checking**, the connection will be allowed only if the global Endpoint Security (HX) host-keys database already has an entry that matches the key the Central Management System appliance sends. ### Caution When you enable global host-key authentication, any established connections will be broken until you explicitly add the host key to the global host-keys database. See [Importing a global host key using the CLI](/docs/importing-a-host-key-into-the-global-host-keys-database-using-the-cli) for instructions. ### Note See the` ssh ` and` cmc `commands in the *CLI Command Reference* for advanced authentication options. To enable strict host-key checking: 1. Log in to the Endpoint Security (HX) CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Enable strict host-key checking: ``` hostname (config) # cmc auth ssh host-key strict ``` 4. Verify your changes: ``` hostname (config) # show cmc auth ssh ``` 5. Save your changes: ``` hostname (config) # write memory ``` To enable global host-key checking: 1. Log in to the Endpoint Security (HX) CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Enable global host-key checking: ``` hostname (config) # cmc auth ssh host-key global-only ``` 4. Verify your changes: ``` hostname (config) # show cmc auth ssh ``` 5. Save your changes: ``` hostname (config) # write memory ``` To disable strict or global host-key authentication: 1. Log in to the CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Perform the following steps as needed. - To disable strict host-key checking: ``` hostname (config) # no cmc auth ssh host-key strict ``` - To disable global host-key checking: ``` hostname (config) # no cmc auth ssh host-key global ``` 4. Verify your changes: ``` hostname (config) # show cmc auth ssh ``` 5. Save your changes: ``` hostname (config) # write memory ``` ### Example This example enforces both strict and global host-key checking on a managed Endpoint Security (HX) appliance. ``` hostname (config) # cmc auth ssh host-key strict hostname (config) # cmc auth ssh host-key global-only hostname (config) # show cmc auth ssh CMC SSH configuration:   Strict host key checking enabled:  yes   Global only known hosts enabled:   yes   Minimum protocol version:          2   Cipher list:                       compatible   Minimum key length:                1024 bits ``` :