--- title: "Generation 6 Hardware - Network ports" slug: "generation-6-hardware-network-ports" tags: ["ESM"] updated: 2026-09-12T21:25:18Z published: 2026-09-12T21:25:18Z canonical: "docs.trellix.com/generation-6-hardware-network-ports" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Generation 6 Hardware - Network ports Identify the ports on Generation 6 hardware and connect those cables. Generation 6 hardware contains management ports so they can be managed from Trellix ESM. The following images identify the management and connection ports. ### Caution Do not connect cables to ports not labeled for a specific purpose. ### Trellix ESM The port assignments are as shown: | ![GUID-C407E3AE-35F8-415F-A152-F1B6F1D1D892-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-74135ca4-7202-53a4-1dc6-950dd259d528.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A34%3A49Z&se=2026-11-22T18%3A34%3A49Z&sr=c&sp=r&sig=yC%2FgvUjAwsGbniWUeOKErWZ9GeZkL9zWL9DwKUfWmKs%3D) | | --- | 1. Power supply 2. VGA video 3. USB port 4. COM port ### Port connections | ![GUID-75BA4658-516A-40DF-8641-ECFD9BC1C596-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d0a65976-d1d7-53e4-ddd7-faaf3d1b63ea.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A34%3A49Z&se=2026-11-22T18%3A34%3A49Z&sr=c&sp=r&sig=yC%2FgvUjAwsGbniWUeOKErWZ9GeZkL9zWL9DwKUfWmKs%3D) | | --- | | Slot numbers | 4-port systems | 8-port systems (add-on only) | Connections | | --- | --- | --- | --- | | 1 | MGMT1 | MGMT1 | Management subnet | | 2 | MGMT2 | MGMT2 | Management subnet | | 3 | ETH2 | ETH2 | Data subnet | | 4 | ETH3 | ETH3 | Data subnet | | 5 | IPMI | IPMI | Isolated RMM subnet | | 6 | Not present | ETH4 | Data subnet | | 7 | Not present | ETH5 | Data subnet | | 8 | Not present | ETH6 | Data subnet | | 9 | Not present | ETH7 | Data subnet | | Slot numbers | 4-port systems | 8-port systems (add-on only) | Connections | | --- | --- | --- | --- | | 1 | ETH3 | ETH3 | Data subnet | | 2 | ETH2 | ETH2 | Data subnet | | 3 | MGMT2 | MGMT2 | Management subnet | | 4 | MGMT1 | MGMT1 | Management subnet | | 5 | IPMI | IPMI | Isolated RMM subnet | | 6 | Not present | ETH8 | Data subnet | | 7 | Not present | ETH7 | Data subnet | | 8 | Not present | ETH5 | Data subnet | | 9 | Not present | ETH4 | Data subnet | ### Note The BMC/RMM port (port 5) is used for setup and troubleshooting. ### High availability connections ERC 3600 and ERC 4800 HA mode use SFP+ ports. If you are upgrading from Gen5 hardware, you need an SPF+ to Rj45 adapter. The IPMI port is not used for HA connections. Deploying ERCs in the same rack for direct connection: - Order 1 x BASECU10G-HW (10G Base CU SFP+ Copper Module) per HA Pair (2 x ERCs). This includes a 5m direct attach cable (DAC) with SFP+ connectors for direct connection between the ERCs. Alternatively, a suitable DAC cable can be used to directly connect the SFP+ heartbeat port of each ERC. Deploying ERCs in different racks connected on a copper network: - TAA Compliant: Order 2 x BASET10G-HW-R1 (10G Base-T Copper SFP+ REV1 Module). - Non-TAA Compliant: Order 2 x BASET1G-HW (1G Base-T Copper Module). ### Note These are single modules and cables are **NOT** included. You must source cables separately and you are responsible for patching the modules to a switch in the ERC rack to route heartbeat traffic. Deploying ERCs in different racks connected on a fibre network: - 2 x SR or LR fiber transceivers are required. Contact Trellix Sales for more information. ### Note Cables are **NOT** included. You must source cables separately and you responsible for patching the modules into your fiber infrastructure. | ![GUID-0883B37F-7E8D-4352-972F-73E2D91D149E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9b5182af-2015-5862-de3f-e7eacf2d0b93.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A34%3A49Z&se=2026-11-22T18%3A34%3A49Z&sr=c&sp=r&sig=yC%2FgvUjAwsGbniWUeOKErWZ9GeZkL9zWL9DwKUfWmKs%3D) | | --- | 1. Port 1 is connected to the switch. 2. Port 2 is connected to the switch. 3. Port 3 of the primary receiver is connected to Port 3 of the secondary receiver. | ![GUID-3A926D98-CBBC-4856-B332-A9B3991B64F9-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ef87aacc-f2fc-dcc7-363b-3c24cbf82655.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A34%3A49Z&se=2026-11-22T18%3A34%3A49Z&sr=c&sp=r&sig=yC%2FgvUjAwsGbniWUeOKErWZ9GeZkL9zWL9DwKUfWmKs%3D) | | --- | 1. Port 1 is connected to the switch. 2. Port 2 is connected to the switch. 3. Port 3 of the primary receiver is connected to Port 3 of the secondary receiver. :