--- title: "Initial configuration using the VMware ESXi server console" slug: "initial-configuration-using-the-vmware-esxi-server-console" tags: ["HX 11.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:49:39Z published: 2026-09-10T15:49:39Z canonical: "docs.trellix.com/initial-configuration-using-the-vmware-esxi-server-console" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Initial configuration using the VMware ESXi server console Trellix recommends that you use the **Properties** screen to provide some initial configuration settings, because you cannot copy and paste into the vSphere Client console. See [Specifying Initial Settings Using the VMware ESXi Properties Screen on page 1](/docs/specifying-initial-settings-using-the-vmware-esxi-properties-screen). However, if you do not use this screen, you can still complete the server configuration using the configuration wizard in the ESXi virtual server console. If the license update feature is not enabled, Trellix recommends that you accept the evaluation licenses during the initial configuration. Manual entry of license keys is error prone. After the activation code is entered and the admin user has access to the Endpoint Security (HX) server Web UI or CLI , you can copy and paste the license keys. To access the VMware ESXi server console and start the configuration wizard: 1. Log in to vSphere client. 2. In the left pane, expand the ESXi IP address and then select the virtual server. 3. Click the **Console** tab. 4. If the console is not running, click the green arrow to launch it. 5. At the login prompt, enter **admin**. 6. If you did not change the admin password on the **Properties** screen, enter **admin** (this is the distributed admin password). If you changed the admin password on the **Properties** screen, enter the new admin password. 7. Start the configuration jump-start wizard: ``` hostname (config) # configuration jump-start ``` 8. Answer the wizard questions as described in [Configuration Wizard Steps](/docs/configuration-wizard-steps). ### Note To navigate away from the vSphere Client console and return to the vSphere Client user interface or your local machine, press Ctrl+Alt. :