--- title: "Install the TIE Server using an ISO file" slug: "install-the-tie-server-using-an-iso-file-4" tags: ["Install and Get Started", "TIE 4.0.x"] updated: 2026-09-11T20:08:07Z published: 2026-09-11T20:08:07Z canonical: "docs.trellix.com/install-the-tie-server-using-an-iso-file-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the TIE Server using an ISO file Deploy the TIE server using an auto-installable ISO file to run on bare metal or the virtualization platforms XEN or Hyper-V. - Make sure the server extension is installed correctly and matches the version of the appliance before you use the ISO. - Store your root password in a secure location. - Make sure that you have the following versions installed or upgraded to: - Trellix ePO - On-prem to version 5.10.0 CU 14. - Trellix Agent to version 5.7.8 or later - Trellix DXL to version 6.0.3 or later > [!TIP] > Tip > > You can also use an ISO file to create a VM in VMWare. We recommend using the OVA appliance as it preconfigures virtual resources. See [KB83368](https://kcm.trellix.com/corporate/index?page=content&id=KB83368) for details about supported platforms, environments, operating systems, and Network Interface Card (NIC) vendors. > [!NOTE] > Note > > The TIE server does not support multiple Network Interface Cards (NICs). See [KB95084](https://kcm.trellix.com/corporate/index?page=content&id=KB95084) for details about an issue with Network Interface Card (NIC) detection on a Bare Metal server during the TIE server installation. The TIE server runs on its own McAfee Linux Operating System (MLOS) distribution based on CentOS 7 (x86_64). To support different virtualization methods, initial scripts load different kernel modules depending on the virtualization platform detected. See [KB86324](https://kcm.trellix.com/corporate/index?page=content&id=KB86324) for details about supported virtualization methods for TIE server. The prerequisites and the installation steps apply for XEN, Hyper-V, and bare metal. The installation is automatic and doesn't need interaction with the user. 1. Create your VM and boot the ISO provided. Wait to complete the process. 2. Remove the ISO file and turn on the VM. > [!WARNING] > Caution > > The Intel microcode package must be installed on TIE servers that are running on bare metal. See [KB90843](https://kcm.trellix.com/corporate/index?page=content&id=KB90843) for details. You can continue installing and configuring the TIE server.