---
title: "Installation command-line interface for Trellix ENS 26.x"
slug: "installation-command-line-interface-for-trellix-ens-26-x"
tags: ["Endpoint Security", "ENS 26.x", "Install and Get Started"]
updated: 2026-09-13T18:51:40Z
published: 2026-09-13T18:51:40Z
canonical: "docs.trellix.com/installation-command-line-interface-for-trellix-ens-26-x"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Installation command-line interface for Trellix ENS 26.x
Use the command line interface to customize installation of Trellix ENS 10.7. You can specify commands when creating ePO - On-prem deployment tasks. You can also run `setupEP.exe` using a third-party tool or the Windows command prompt on the endpoint.
### Syntax: Deployment task options
When creating a deployment task in ePO - On-prem, in the **Command line** box, you can enter the commands listed in the *Deployment task and setupEP.exe command-line options* table.
When using the `setupEP.exe` command line on the endpoint, or installing on the endpoint using a third-party tool, the command-line syntax for installation is:
```
command_args
```
- `installation_path` — The folder where you extracted the installation package.
- `command_args`— Commands in the Deployment task and setupEP.exe command-line options table.
- `setupEP_command_args`— Commands in the setupEP.exe command-line options table
These options are available when installing with a deployment task in ePO - On-prem or by running `setupEP.exe` from the command line on the endpoint.
Options are not case sensitive.
**Deployment task and setupEP.exe command-line options**
| Option | Parameters | Description | Notes |
| --- | --- | --- | --- |
| `CAVA="thread_count"` | `thread_count` — (Optional) Specifies the number of scanning threads to use. | Installs Trellix ENS with support for the Common AntiVirus Agent (CAVA). Requires Threat Prevention. | Required when upgrading from a previous version of Trellix ENS with CAVA. This option disables the blocking cache in the on-access scanner, increases the number of on-access scanning threads to 200, and enables network scanning, to ensure that all files from CAVA are scanned. You can also specify a different number of scanning threads. See [How to install Endpoint Security with support for CAVA (KB88973)](https://thrive.trellix.com/s/article/KB88973) for more information. |
| `INSTALLDIR="path"` | `path` | Specifies where to install the product files on the endpoint. | The installer creates an Endpoint folder at the specified location and installs the product to this folder. By default, product files are installed in the folder C:\Program Files\McAfee\Endpoint Security. |
| `/log"path"` `/l"path"` | `path` | Specifies where to save the installation log files for tracking installation events. | The installer creates an Endpoint folder at the specified location and saves the log files to this folder. By default, log files are saved in the Windows System TEMP folder C:\windows\Temp\McAfeeLogs. |
| `/l*v"path"` | `path` | Specifies where to save the installation log files and verbose (more descriptive) logging entries. | |
| `/nocontentupdate` | | Does not automatically update product content files on the endpoint as part of the installation process. | Content files include the latest AMCore, Exploit Prevention, and Adaptive Threat Protection content files required for Trellix ENS. > [!WARNING] > Caution > > Update content files to make sure that the endpoint is fully protected. If you don't update them during installation, schedule an update as soon as possible. |
| `/noinstalltelemetry` | `noinstalltelemetry` | Disables the AMCore install telemetry. | This command line option is applicable only for the Threat Prevention installer. |
| `/override"program"` | `hips` — Host Intrusion Prevention | Overrides and removes the specified conflicting product. | |
| `/quarantinefolder="path"` | `path` | Specifies the location of the Quarantine folder where detected threats are placed. The folder path is limited to 190 characters. | By default, the Quarantine folder is located in the folder \Quarantine. |
These additional options are available when running `setupEP.exe` from the command line on the endpoint.
**setupEP.exe command-line options**
| Option | Parameters | Description |
| --- | --- | --- |
| `ADDLOCAL="tp,fw,wc,atp"` | - `tp` — Threat Prevention - `fw` —Firewall - `wc` — Web Control - `atp` — Adaptive Threat Protection | Specifies individual product modules to install in silent mode. Before you can install `atp`, `tp` must be installed. **Best practice:** For optimal performance and protection, install the same version of the Trellix ENS modules or upgrade all modules to the latest version. All Trellix ENS modules installed or upgraded on a system should originate from the same source package, avoiding a mix and match of installed module versions. > [!TIP] > Tip > > When using `ADDLOCAL`, there are no endpoint notifications or user interactions. It behaves like `/qn` is specified. To change this behavior, you can specify `/q!` or `/qb`. |
| `/noinstalltelemetry` | `installtelemetry` | Disables the AMCore install telemetry. This command line option is applicable only for the Threat Prevention installer. |
| `/qn` or `/quiet` `/qb!` or `/passive` `/qb` | - `qb!` — Shows only a progress bar. Users cannot cancel the installation while it is in progress (passive mode). - `qb` — Shows a progress bar and a **Cancel** button. Users can cancel the installation while it is in progress, if needed. - `qn` — Hides all installation notifications (silent mode). Users have no interaction. > [!NOTE] > Note > > When using `ADDLOCAL` to install, this is the default behavior and you do not need to specify it. | Specifies how users interact with the installer. |
| `/import file` | `file` | Imports settings from the specified file. |
| `/module <TP,FW,WC,ATP,ESP>` | - `TP` — Threat Prevention - `FW` — Trellix ENS Firewall - `WC` — Web Control - `ATP` — Adaptive Threat Protection - `ESP` — Resources shared by product modules. | Applies imported settings to the specified product modules. |
| `/nopreservesettings` | | Does not save your product settings when upgrading to Trellix ENS. By default, settings are preserved. |
| `/policyname name` | `name` | Assigns the specified settings to endpoints where the product is installed. |
| `/unlock password` | `password` | Unlocks the client interface using the specified password. |
### Examples: Deployment task and setupEP command-line options
To run these example commands:
- **In ePO - On-prem** — On the **Create Deployment Task** page, type options in the **Command line** box.
- **On the endpoint** — Open a command prompt in Windows, then change to the location where you extracted the installation package.
- **In a third-party deployment tool** — When creating a deployment task, for the installation command line enter `setupEP.exe` with the options needed for your environment.
**Best practice:** Use `setupEP.exe ADDLOCAL="tp,atp,fw,wc"` to install all the product modules on endpoints without displaying notifications or interrupting user activity.
| To... | Add these options in the deployment task | Run this command from the command line |
| --- | --- | --- |
| Install Firewall and Web Control (and Common, if needed). | `ADDLOCAL="fw,wc"` | `setupEP.exe ADDLOCAL="fw,wc"` |
| Install the product modules using a third-party deployment tool. By default, there are no notifications on the endpoint or user interaction. | `ADDLOCAL="tp,atp,fw,wc"` | `setupEP.exe ADDLOCAL="tp,atp,fw,wc"` |
| Install the product modules under D:\Installed Programs\Mcafee\Endpoint Security instead of the default location (C:\Program Files\McAfee\Endpoint Security). | `ADDLOCAL="tp,atp,fw,wc"` | `setupEP.exe INSTALLDIR="D:\Installed Programs"` |
| Install the product modules without uninstalling MOVE. > [!WARNING] > Important > > Ensure the following configuration is also applied through Trellix ENS Threat Prevention policy: > > - Disable the Threat Prevention On-Access Scan. > - Disable all On-Demand Scan client tasks (Custom On-Demand Scan, Pause On-Demand Scan, Policy On-Demand Scan). | `ADDLOCAL="tp,atp,fw,wc" /keepMOVE` | `setupEP.exe INSTALLDIR="D:\Installed Programs" /keepMOVE` |
| Save product log files under D:\Log Files instead of the default location (C:\Windows\Temp\McAfeeLogs). | `/l"D:\Log Files"` | `setupEP.exe /l"D:\Log Files"` |
| Save product log files under D:\Log Files and specify verbose logging. | `/l*v"D:\Log Files"` | `setupEP.exe /l*v"D:\Log Files"` |
| Remove McAfee Host Intrusion Prevention automatically during installation. | `/override"hips"` | `setupEP.exe /override"hips"` |
| Create a Quarantine folder at D:\reports\Quarantine instead of the default location (\Quarantine). | `/quarantinefolder="D:/reports"` | `setupEP.exe /quarantinefolder="D:/reports"` |
| Install Threat Prevention with support for CAVA and increase the number of on-access scanning threads to 220. | `ADDLOCAL="tp" CAVA="220"` | `setupEP.exe ADDLOCAL="tp" CAVA="220"` |
| Install Adaptive Threat Protection (and Threat Prevention and Common) automatically without updating the product content files during installation. | `ADDLOCAL="atp" /nocontentupdate` | `setupEP.exe ADDLOCAL="atp" /nocontentupdate` |
| Import settings from the file called `mysettings`. | | `setupEP.exe /import mysettings` |
| Import settings from the file called `mysettings` to Threat Prevention and Firewall. | | `setupEP.exe /import mysettings /module TP,FW` |
| Install the product modules using a third-party deployment tool. By default, there are no notifications on the endpoint or user interaction. | | `setupEP.exe ADDLOCAL="tp,atp,fw,wc"` |