--- title: "Installing licenses using the CLI" slug: "installing-licenses-using-the-cli-3" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/installing-licenses-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing licenses using the CLI Use the CLI commands in this topic to install licenses on the HX appliance. Prerequisites - Admin or Operator access To install licenses: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Install each license: ``` hostname (config) # license install ``` ### Note You can enter the license keys sequentially separated by spaces as shown above, or enter `license install` and then press Enter to be prompted to enter the license keys one at a time. 3. Verify the licenses: ``` hostname (config) # show licenses License 1: LK2-FIREEYE_APPLIANCE-    Feature:          FIREEYE_APPLIANCE    Description:      FireEye Appliance Type    Valid:            yes    Start date:       2016/12/01 (ok)    Tied to appl ID:  8699351EB1D5 (ok)    Product:          HX (ok)    Type:             PROD (ok)    Tied to model:    FireEyeHXVM (ok)    Agreement:        EULA (ok)    Appliance role:   master    Active:           yes ``` ``` License 2: LK2-CONTENT_UPDATES-    Feature:          CONTENT_UPDATES    Description:      Content updates    Valid:            yes    Start date:       2016/12/01 (ok)    End date:         2017/12/01 (ok)    Tied to appl ID:  8699351EB1D5 (ok)    Sharing:          all (ok)    Active:           yes License 3: LK2-FIREEYE_SUPPORT-    Feature:          FIREEYE_SUPPORT    Description:      FireEye support    Valid:            yes    Start date:       2016/12/01 (ok)    End date:         2017/12/01 (ok)    Tied to appl ID:  8699351EB1D5 (ok)    Sharing:          all (ok)    Active:           yes ``` ``` ... ``` 4. Save your changes: ``` hostname (config) # write memory ``` :