--- title: "Integrating Network Security appliances and Endpoint Security (HX) servers directly" slug: "integrating-network-security-appliances-endpoint-security-hx-servers-6" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:24:36Z published: 2026-09-23T17:24:36Z canonical: "docs.trellix.com/integrating-network-security-appliances-endpoint-security-hx-servers-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Integrating Network Security appliances and Endpoint Security (HX) servers directly If your Endpoint Security (HX) server is not managed by a Central Management System appliance, you must configure the Network Security appliance to communicate with the Endpoint Security (HX) server. ### Important Do not use this procedure if you have already integrated your Endpoint Security (HX) server with a Central Management System appliance (see [Integrating Central Management appliances and Endpoint Security (HX) servers](/docs/integrating-central-management-system-appliances-endpoint-security-hx-servers-3)). Using both types of integration will cause errors in the Central Management System integration. Alerts can only be sent from an Malware Analysis or Email Security — Server appliance to the Endpoint Security (HX) server through a Central Management System appliance. Attempts to send Malware Analysis or Email Security — Server alerts to the Endpoint Security (HX) server using the direct connection set up between an Network Security appliance and the server will fail. Trellix only provides the direct connection between Network Security and Endpoint Security (HX). Use the Central Management System appliance connection with the Endpoint Security (HX) server for Malware Analysis and Email Security — Server alerts. To configure Endpoint Security (HX) integration with Network Security appliances directly when the Endpoint Security (HX) server is not managed by a Central Management System appliance: 1. On your Endpoint Security (HX) server, enable CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable Trellix legacy appliance support for the Endpoint Security (HX) server: ``` hostname (config) # hx server detection legacy enable ``` 3. Save your changes: ``` hostname (config) # write mem ``` 4. Log in to the Web UI of the Network Security appliance and then click **Settings**. (On a Central Management System appliance, click **CMS Settings**). 5. Click **Notifications** in the left navigation pane. 6. Verify that all HTTP event types are selected for the appliance. 7. Click the **http** table heading to access HTTP notification configuration fields. These fields allow you to define the HTTP connection with your Endpoint Security (HX) appliance. 8. Type a name for the Network Security appliance's direct connection to the Endpoint Security (HX) appliance in the **Name** box and then click **Add HTTP Server**. 9. Enter the Endpoint Security (HX) URL in the **Server Url** box: ``` https:///alerts ``` For example: `https://123.456.78.90/alerts` 10. Select the checkbox in the **Enabled** column for the Endpoint Security (HX) server connection. This enables HTTP notifications between the Network Security appliance and the Endpoint Security (HX) server. 11. Leave the **Username** and **Password** boxes for the Endpoint Security (HX) server connection empty. 12. Select **All Events** from the list in the **Notifications** column for the Endpoint Security (HX) server connection. 13. In the **Delivery** list for the Endpoint Security (HX) server connection, select **Per Event**. 14. Select the **SSL Enable** box. Do *not* select the **SSL Verify** box for the Endpoint Security (HX) server connection. 15. In the **Default Provider** list, select **Generic**. 16. In the **Message Format** list, select **JSON Extended**. 17. Click **Update** to save the Endpoint Security (HX) server connection. :