--- title: "Level 7 collection on Trellix Intrusion Prevention System Manager" slug: "level-7-collection-on-trellix-intrusion-prevention-system-manager-1" tags: ["ESM"] updated: 2026-09-12T21:25:04Z published: 2026-09-12T21:25:04Z canonical: "docs.trellix.com/level-7-collection-on-trellix-intrusion-prevention-system-manager-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Level 7 collection on Trellix Intrusion Prevention System Manager Layer 7 data populates the Trellix Intrusion Prevention System Manager database after the NSM event is written to its database. It doesn't come into the system as part of the event. To pull Layer 7 information from the NSM, you can delay when the event is pulled so that Layer 7 data is included. This delay applies to all NSM events, not only the ones with associated Layer 7 data. You can set this delay when performing three different actions related to the NSM: - Adding a Trellix NSM device to the console - Configuring an NSM device - Adding an NSM data source ### Adding a Trellix Intrusion Prevention System Manager device When adding the Trellix Intrusion Prevention System Manager device to Trellix ESM, select **Enable Layer 7 Collection** and set the delay on the **Add Device Wizard**. ### Configuring a Trellix Intrusion Prevention System Manager device After adding a Trellix Intrusion Prevention System Manager device to Trellix ESM, configure the connection settings for the device. You can select **Enable Layer 7 Collection** and set the delay. ### Adding a Trellix Intrusion Prevention System Manager data source To add a Trellix Intrusion Prevention System Manager data source to a Receiver, select Trellix in **Data Source Vendor** and **Network Security Manager - SQL Pull (ASP)** in **Data Source Model**. You can select **Enable Layer 7 Collection** and set the delay. :