--- title: "Limit malformed or unexpected data issues" slug: "limit-malformed-or-unexpected-data-issues" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:30:58Z published: 2026-08-26T19:30:58Z canonical: "docs.trellix.com/limit-malformed-or-unexpected-data-issues" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Limit malformed or unexpected data issues You can set a limit for the number of unique issues reported for an Enterprise Search that are related to malformed or unexpected data on host endpoints encountered during the search. Such search issues are common, but may mean that the host could not be fully searched for the item types in which the problems were encountered. The default is 10 unique issues. When this limit is reached, the Endpoint Security (HX) stops recording issues for the search, even though the Enterprise Search continues. You can review and modify this limit using the CLI. **Prerequisites** - Admin access ### Review the issue limit **To review the issue limit:** 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Review the issue limit: ``` hostname (config) # show hx server search ``` The output from this command might look like this: ``` Search issues item limit: 20 ``` ### Change the issue limit **To change the issue limit:** 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Change the issue limit: ``` hostname (config) # hx server search issues items-limit ``` where `<number>` is the number of unique search issues reported for an Enterprise Search. Valid values range from 0 through 100 issues. Specifying 0 requests that search issues related to malformed or unexpected data on host endpoints should not be reported for Enterprise Searches. 3. Save your settings. ``` hostname (config) # write mem ``` ### Revert to the issue limit default of 10 unique issues **To revert to the issue limit default of 10 unique issues:** 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Revert to the issue limit default: ``` hostname (config) # no hx server search issues items-limit ``` 3. Save your settings. ``` hostname (config) # write mem ```