--- title: "Link storage devices to storage pools" slug: "link-storage-devices-to-storage-pools" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:32Z published: 2026-09-12T21:19:32Z canonical: "docs.trellix.com/link-storage-devices-to-storage-pools" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Link storage devices to storage pools Add storage devices to make more events and flows available to the Trellix Enterprise Security Manager - Enterprise Log Manager. Set up storage devices. > ### Note > > When editing storage devices, you can increase the size, but you can't reduce it. You can't delete a device if it's storing data. 1. On the system navigation tree, select **ELM Properties**, then click **Storage Pools**. 2. Click **Add**. 3. On **Add Storage Device**, fill in the requested information then click **OK**. - **Device Type** — Select the type of storage device. Migrating the ELM database requires a minimum of 506 GB of free disk space. - **Name** — Type a name for the storage device. - **Max size** — Select the maximum amount of storage space that you want to allocate on this device. - When adding a remote storage device to the ELM, **Max size** defaults to 4 GB. One percent of the storage space is reserved for management of the remote storage. - When adding a virtual local storage device, **Max size** defaults to the total storage capacity of the device. Six GB of the storage space is reserved for management of the virtual storage. You can't adjust this field. - **IP Address**, **Remote Mount Point**, **Remote Path** — Type this information for the NFS device. - **IP Address**, **Remote Share Name**, **Path**, **Username**, **Password** — Type this information for the CIFS device. - **iSCSI Device** — Select the device that you added. - **iSCSI IQN** — Select the IQN. - **SAN** — Select the SAN volume that you added. - **Virtual Local Volume** — Select the virtual local storage device. This option is only available when the device type is **Virtual Local**. 4. Define connection parameters of a storage device, which is used in a storage pool for data retention. - **Data Storage Devices** — Select the device you want to add. > ### Note > > You can assign a device to more than one pool at a time. - **Storage space** — Select the maximum amount of space on this device for storing data. > ### Note > > The system uses 10 percent of the storage space for overhead. For example, if you select 4 GB in the storage space field, 3.6 GB is available to store data. - **Mirrored Data Storage Device** — To mirror data on this storage device with another device, select the second storage device.