--- title: "Modifying the host description in the containment allow list using the CLI" slug: "modifying-the-host-description-in-the-containment-allow-list-using-the-cli-1" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:26Z published: 2026-09-10T15:35:26Z canonical: "docs.trellix.com/modifying-the-host-description-in-the-containment-allow-list-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Modifying the host description in the containment allow list using the CLI You can change the host description by entering a new description for an existing host listed in the allow list. To modify the host description in the containment allow list: ``` hostname (config) # hx server containment whitelist description ``` 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Modify the host description. Enclose descriptions that are longer than one word in quotation marks ("). 3. Save your settings. ``` hostname (config) # write mem ``` ### Note To list the hosts currently on the allow list, enter this command: `hostname (config) # show hx server containment` ### Examples The following example changes a host description in the containment allow list to a single word: ``` hostname (config) # hx server containment whitelist testserverhost description testserver                   ``` The following example changes a host description in the containment whitelist to a string of words: ``` hostname (config) # hx server containment whitelist 123.45.6.7 description “The Group A Test Appliance”                   ``` :