Move data sources from secured Receivers to Receivers on unsecured locations on different systems. Select data sources to be moved, save them and their raw data to a remote location, then you can import the data sources to another Receiver.
Important
Before you begin, verify that you have device management rights on both Receivers. There are limitations when exporting data source information:
You can't transport flow data sources (for example, IPFIX, NetFlow, or sFlow).
The source events of correlated events do not display.
If you change correlation rules on the second Receiver, the correlation engine doesn't process those rules. When you transport correlation data, they system inserts those events from the file.
On the system navigation tree, select Receiver Properties.
To select the data sources and remote location, do the following:
Select the data source, then click Edit.
Click Advanced, then select Export in NitroFile.
Note
The data is exported to a remote location and is configured using profile. The system now copies raw data generated by this data source to the remote share location.
To create raw data file, do the following:
Access the remote share location where the raw data is saved.
Save the raw data that has been generated in a location that allows you to move the file to the second Receiver (such as a jump drive that you can carry to the unsecured location).
To create a file that describes data sources, do the following:
Select the data source, then click Import.
Locate the file of data sources you moved and click Upload.
On the Remote share profile list, select the location where you saved the raw data files. If the profile isn't listed, click Remote share profile and add the profile.
Note
The data sources are added to the second Receiver and accesses the raw data through the remote share profile.
To import raw data and data source files, do the following:
On the second Receiver system navigation tree, access Data Sources, then click Import.
Locate the file of data sources you moved and click Upload.
On the Remote share profile list, select the location where you saved the raw data files. If the profile is not listed, click Remote share profile and add the profile.
Click OK.