--- title: "Move data sources to another system" slug: "move-data-sources-to-another-system" tags: ["ESM", "Reference"] updated: 2026-10-27T15:50:33Z published: 2026-10-27T15:50:33Z canonical: "docs.trellix.com/move-data-sources-to-another-system" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Move data sources to another system Move data sources from secured Receivers to Receivers on unsecured locations on different systems. Select data sources to be moved, save them and their raw data to a remote location, then you can import the data sources to another Receiver. ### Important Before you begin, verify that you have device management rights on both Receivers. There are limitations when exporting data source information: - You can't transport flow data sources (for example, IPFIX, NetFlow, or sFlow). - The source events of correlated events do not display. - If you change correlation rules on the second Receiver, the correlation engine doesn't process those rules. When you transport correlation data, they system inserts those events from the file. 1. On the system navigation tree, select **Receiver Properties**. 2. To select the data sources and remote location, do the following: 1. Select the data source, then click **Edit**. 2. Click **Advanced**, then select **Export in NitroFile**. ### Note The data is exported to a remote location and is configured using profile. The system now copies raw data generated by this data source to the remote share location. 3. To create raw data file, do the following: 1. Access the remote share location where the raw data is saved. 2. Save the raw data that has been generated in a location that allows you to move the file to the second Receiver (such as a jump drive that you can carry to the unsecured location). 4. To create a file that describes data sources, do the following: 1. Select the data source, then click **Import**. 2. Locate the file of data sources you moved and click **Upload**. 5. On the **Remote share profile** list, select the location where you saved the raw data files. If the profile isn't listed, click **Remote share profile** and add the profile. ### Note The data sources are added to the second Receiver and accesses the raw data through the remote share profile. 6. To import raw data and data source files, do the following: 1. On the second Receiver system navigation tree, access **Data Sources**, then click **Import**. 2. Locate the file of data sources you moved and click **Upload**. 3. On the **Remote share profile** list, select the location where you saved the raw data files. If the profile is not listed, click **Remote share profile** and add the profile. 7. Click **OK**. :