--- title: "Network requirements" slug: "network-requirements-9" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/network-requirements-9" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Network requirements Connectivity with FireEye's Dynamic Threat Intelligence (DTI) network (one-way or two-way sharing) is required. Endpoint Security (HX) appliances can download software updates (security content and system images) from the FireEye Dynamic Threat Intelligence (DTI) network. With a two-way content license, the appliance can also upload threat intelligence information to the DTI network. By default, CM-managed appliances receive software updates from the DTI network through the Central Management System appliance. ### Standalone Endpoint Security (HX) appliances that receive DTI updates The Central Management System appliance and standalone (not managed by Central Management System) appliances use the ether1 port to communicate directly with the DTI network. In the default configuration, where you receive updates from the DTI network (**cloud.fireeye.com**), allow outbound access to all IP addresses on the following ports: - DNS (UDP/53) - HTTPS (TCP/443) Management interface ether1 requires a static IP address or reserved DHCP address and subnet mask. Environments that restrict outbound access to certain IP addresses If your security policy requires that you restrict outbound access to certain IP addresses, you cannot use the DTI network. Instead, point to **staticcloud.fireeye.com** for DTI updates, and allow access to the ***incapdns.net** domain. For appliances that get threat intelligence from the DTI cloud, you need to enable access to the Amazon Web Services (AWS) cloud for ATI communication. The intel context service is hosted in multiple AWS regions and resolves to multiple IP addresses based on geographic location. To configure and access staticcloud.fireeye.com: 1. Enable CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enter the following command from the appliance CLI: ``` hostname (config) # fenet dti source default DTI ``` 3. Save your configuration. ``` hostname (config) # write mem ``` 4. Add IP addresses to the firewall. See [https://fireeyecommunity.force.com/CustomerCommunity/s/article/000001543](https://fireeyecommunity.force.com/CustomerCommunity/s/article/000001543). To allow access to *incapdns.net: 1. Add the block of IP addresses found at [https://incapsula.zendesk.com/hc/en-us/articles/200627570-Restricting-direct-access-to-your-website-Incapsula-s-IP-addresses-](https://incapsula.zendesk.com/hc/en-us/articles/200627570-Restricting-direct-access-to-your-website-Incapsula-s-IP-addresses-) to the firewall. 2. Allow access to the ***.incapdns.net** domain at the proxy device. To allow access to the AWS cloud for threat intelligence: 1. Go to [https://dnschecker.org/#A/context.fireeye.com](https://dnschecker.org/#A/context.fireeye.com) to determine the IP addresses for your location. 2. See the AWS IP address range documentation for information about whitelisting the IP addresses. ### Domain-based proxy ACL rules If your configuration includes domain-based proxy ACL rules, allow access to `*.fireeye.com`. ### Trellix Endpoint Security (HX) malware definitions The malware protection provided with HX Series 4.0 and Trellix xAgent 26.21 (and later versions) use malware definitions to detect and identify files infected by malware. These malware definitions are downloaded by Trellix's Dynamic Threat Intelligence (DTI) cloud and the Endpoint Security (HX) server from `avupdate.fireeye.com`. However, if your security policy makes use of a firewall to restrict access to certain IP and web addresses, you need to configure your firewall rules to allow access to `avupdate.fireeye.com`. The IP addresses associated with `avupdate.fireeye.com` vary based on your environment. The following are some possible solutions. - Use DNS names instead of IP addresses in the firewall rules. The firewall rules will be automatically applied to the correct IP addresses as appropriate for `avupdate.fireeye.com`. - Do a DNS reverse lookup to identify the IP addresses used by `avupdate.fireeye.com` in your environment and then use those IP addresses in the firewall rules. - Use a caching proxy server to obtain the malware definition updates from `avupdate.fireeye.com`. Be sure your firewall rules allow access to `*.fireeye.com`. :