--- title: "proxy type Key" slug: "proxy-type-key" updated: 2026-09-08T19:11:41Z published: 2026-09-08T19:11:41Z canonical: "docs.trellix.com/proxy-type-key" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # proxy type Key The proxy `type` key controls the type of proxy server your endpoint uses. Options include `none`, `system`, and `manual`. The default value is `none`. The table below defines each proxy type. | Type Value | Description | | --- | --- | | `none` | No proxy server. Proxy switch is disabled. | | `system` | Configure your local system as a proxy server. See Configuring a Proxy Server Policy for the Default Policy. Host containment works only at the IP protocol layer. If your host endpointsuse a proxy server that has been added to the containment whitelist, a contained host will still be able to send and receive Web traffic and other traffic. If you are using an agent proxy and you want to be able to contain compromised hosts, you must set up the proxy server with a separate IP address that can only be used to reach the Endpoint Security (HX) server. Use the Endpoint Security (HX) xAgent Web UI to add the proxy server IP address to the Allowed IP Addresses on the **Containment Settings** page. See the *Endpoint Security User Guide* for more information. | | `manual` | Manually configure a remote system as your proxy server. See Configuring a Proxy Server Policy for the Default Policy. ### Note When the proxy `type` is set to `manual`, the proxy `server` setting is required or your proxy server connection will fail. The proxy `server` setting has no default value. | Change this setting using one of the following methods: - Web UI (See [Configuring an HTTPS Proxy Server Using the Web UI](/docs/configuring-a-proxy-server-policy-for-the-default-policy)). - API custom configuration channels (see [Using API Custom Configuration Channels](/docs/using-api-custom-configuration-channels)). - Manually on individual endpoints using a text editor (see [Modifying the Configuration File for a Single Endpoint](/docs/modifying-the-configuration-file-for-a-single-endpoint)). For manual changes, the proxy `type` key should be listed within quotation marks ("). Enclose the full list of proxy server settings in bracket ({}). For example, you can set the host value to `"type": "manual",`. `{` `"proxy": {` `"type": "manual",` `"host": "proxy.fireeye.com",` `"port": 80,` `"exclude_hosts": ["eng.fireeye.com", "host.fireeye.com"],` `"exclude_local_hosts": true,` `"username": "<proxy-user>",` `"password": "<proxy-user-password>"` `}` :