--- title: "Removing a host from the containment allow list using the CLI" slug: "removing-a-host-from-the-containment-allow-list-using-the-cli-1" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:26Z published: 2026-09-10T15:35:26Z canonical: "docs.trellix.com/removing-a-host-from-the-containment-allow-list-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Removing a host from the containment allow list using the CLI To remove a host from the containment allow list using the CLI: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Remove the IP address or hostname from the containment allow list. ``` hostname (config) # no hx server containment whitelist ``` 3. Save your settings. ``` hostname (config) # write mem ``` ### Note To list the hosts currently on the allow list, enter the following command: `hostname (config) # show hx server containment` :