--- title: "Reset a Trellix SIEM appliance" slug: "reset-a-trellix-siem-appliance" tags: ["ESM"] updated: 2026-09-12T21:25:11Z published: 2026-09-12T21:25:11Z canonical: "docs.trellix.com/reset-a-trellix-siem-appliance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reset a Trellix SIEM appliance Reset a Trellix SIEM appliance to factory defaults. Causes for a reset: - Unrecoverable disk corruption - Downgrading to an older device version - Preparing for a redeployment - Changing the FIPS compliance mode ### Important Do not try to reset your device without consulting Trellix Support. A Trellix Support Engineer can help you determine the nature of the fault, and if a reset is needed. This process deletes all event data on the device. 1. Prepare the USB drive. 1. Format the drive with NTFS. 2. Download the Yumi Multiboot tool and not the UEFI edition. 3. From the Yumi tool, select the USB drive and the image file. 4. Click **Create** and wait for the setup to complete. 5. (Optional) To add additional image files, click **Next**. 2. Use the USB drive. 1. Insert the USB drive into a USB slot on the SIEM device. 2. On the BIOS screen, press **F6** to trigger the boot menu. 3. Select the USB drive. The install prompt appears. 4. Enter **`<device name>-usb`**. Where **`<device name>`** is the name of the device. ### Important Make sure that you enter **`-usb`** even if the prompt asks you to press **Enter**. 5. Once the ISO file is copied, remove the USB from the device. 6. Reboot the machine. :