--- title: "Restoring single-port communication using the CLI" slug: "restoring-single-port-communication-using-the-cli" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/restoring-single-port-communication-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Restoring single-port communication using the CLI Single-port communication is the default behavior on the Endpoint Security (HX) appliance, and requires no configuration. Use the commands in this topic to restore single-port communication if dual-port communication was enabled. ### Important Before you restore single-port communication, make sure **CMS** is the configured DTI source (see [Changing the active setting for a DTI service](/docs/changing-the-active-setting-for-a-dti-service) for details). To restore single-port communication: 1. Log in to the appliance CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. If your appliance has already been added to the Central Management System appliance, type `yes` to confirm that you want to enter configuration mode: ``` ****************** *** CMS notice *** ******************    This system is under management of a CMS. Please note that    the CMS may update this system's configuration, which could    overwrite changes that you have made locally.    Enter 'YES' to enter configuration mode anyway: yes ``` 4. Enable single-port communication: ``` hostname (config) # fenet dti source type CMS address-type cms-singleport ``` ### Note You can also use the` no fenet dti source type CMS address-type `command to enable single-port communication. 5. Verify the configuration. ``` hostname (config) # show fenet dti configuration ``` The entries in the Active Settings list end with the following text: ``` : singleport) - Managed by CMS ``` 6. Save your changes. ``` hostname (config) # write memory ``` ### Example This example enables single-port communication. ``` hostname (config) # fenet dti source type CMS address-type cms-singleport hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:   Mode               : online   Download source    : CMS (DTIUser@10.2.0.0 : singleport) - Managed by CMS   Upload destination : CMS (DTIUser@10.2.0.0 : singleport) - Managed by CMS   Mil service        : CMS (DTIUser@10.2.0.0 : singleport) - Managed by CMS      AVAILABLE OPTIONS:  ----------------------------------------------------  Download   User                  Address  ----------------------------------------------------  CDN        DTIUser               cloud.fireeye.com  CMS        DTIUser               10.2.0.0  DTI        DTIUser               staticcloud.fireeye.com  ... ``` :