--- title: "Sending a management request using the CLI" slug: "sending-a-management-request-using-the-cli" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:24:36Z published: 2026-09-23T17:24:36Z canonical: "docs.trellix.com/sending-a-management-request-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sending a management request using the CLI Use the commands in this section on an appliance to initiate a request to be added to the Central Management System appliance. To initiate a request to be managed: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the hostname or IP address of the Central Management System appliance: ``` hostname (config) # cmc client server address ``` 3. Specify the authentication type and the credentials of the Central Management System user the appliance should use to log in to the Central Management System appliance to announce itself. ``` hostname (config) # cmc client server auth authtype ``` ``` hostname (config) # cmc client server auth username ``` ``` hostname (config) # cmc client server auth {password } | {identity } ``` where: - `<authType>` can be **password**, **ssh-dsa2**, or **ssh-rsa2**. - **password** `<password>` is used with the password authentication. - **identity** `<identityName> `is used with SSH-DSA2 and SSH-RSA2 authentication. 4. Enable automatic rendezvous attempts: ``` hostname (config) # cmc rendezvous client auto ``` 5. Verify that the auto connect feature is enabled: 1. View appliance (client) information: ``` hostname (config) # show cmc client ``` 2. If `Autoconnect: no` is shown, enable auto connect: ``` hostname (config) # cmc client connection auto ``` 6. Start the configuration wizard. ``` hostname (config) # configuration jump start ``` 7. Answer the configuration wizard questions, and at question 14 type **yes** to send a request to be managed by the Central Management System appliance. ``` ... ``` ``` Step 14: Send a request to be managed by CMS (More common method is to set up management from CMS) [yes/no]? yes ``` ``` Step 15: CMS Address? [10.128.32.104] ``` ``` Step 16: CMS Server username? [admin] ``` Step 17: CMS Server admin password (Enter to leave unchanged)? ``` Step 18: CMS Port? [22] ``` ``` Step 19: Appliance Reachable to CMS? [yes] ``` ``` Step 20: Authetication type (0->password,1->ssh-rsa2,2->ssh-dsa2)? [ssh-rsa2] 1 ``` ``` Auth is already set to ssh-rsa2 ``` ``` Connection to CMS is in process... ``` ``` Step 19: Appliance Reachable to CMS? [yes] ``` ``` Connection announcement succeeded; ``` ``` ... waiting for server acceptance ``` ``` You have entered the following information: ``` ``` ... ``` ``` To change an answer, enter the step number to return to. ``` ``` Otherwise hit to save changes and exit. ``` 8. Press **Enter** to save your changes. :