--- title: "service Section Settings" slug: "service-section-settings-1" updated: 2026-09-08T19:19:55Z published: 2026-09-08T19:19:55Z canonical: "docs.trellix.com/service-section-settings-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # service Section Settings [Skip to main content](/docs/service-section-settings-1#content-wrapper) The `service` section settings define the interaction between the server and the agent. These settings can also be changed [manually](/docs/modifying-the-configuration-file-for-a-single-endpoint-1) for an individual host using a text editor. | Setting Key | Default | Supported Edit Methods | | --- | --- | --- | | Web UI | CLI | API | | [config_poll_interval_sec](/docs/service-section-settings-1#UUID-1e481653-10be-1406-2ce7-1869cf6b0507) | 900 seconds (15 minutes) | Yes | Yes | Yes | | [config_pull_enabled](/docs/service-section-settings-1#UUID-784c98bd-6bde-3105-680c-5b2fe5bc63f8) | true | No | No | Yes | | fastpoll_agents | 60 seconds | Yes | No | Yes | | poll_agents | 10 minutes | Yes | No | Yes | | request_sysinfo | 4 hours | Yes | No | Yes | ##### config_poll_interval_sec Key The `config_poll interval` key specifies the number of seconds at which polling occurs for the configuration file. Valid values are integers ranging from 60 seconds (one minute) to 86400 seconds (one day). The default is 900 seconds (15 minutes). Change this setting using one of the following methods: - Web UI (see [Configuring Polling](/docs/configuring-polling-1)) - CLI (see [Configuring the Agent Configuration File Update Frequency for All Endpoints](/docs/configuring-the-xagent-configuration-file-update-frequency-1)) - API custom configuration channels (see [Using API Custom Configuration Channels](/docs/using-api-custom-configuration-channels-1)). - Manually on individual endpoints using a text editor (see [Modifying the Configuration File for a Single Endpoint](/docs/modifying-the-configuration-file-for-a-single-endpoint-1)). ##### config_pull_enabled Key The `config_pull_enabled` key indicates whether the xAgent configuration file is dynamically pulled from the Endpoint Security (HX) server . When the configuration file is pulled from the server, configuration updates are applied automatically, overwriting the file on disk. A new configuration file may force the agent service to be restarted, depending on which configuration setting was changed. Valid values are `true` (the configuration file is dynamically pulled) and `false` (the configuration file is not dynamically pulled). The default is `true`. Change this setting using one of the following methods: - API custom configuration channels (see [Using API Custom Configuration Channels](/docs/using-api-custom-configuration-channels-1)). If you are using API custom configuration channels, make sure this value is `true` in the channel settings. - Manually on individual endpoints using a text editor (see [Modifying the Configuration File for a Single Endpoint](/docs/modifying-the-configuration-file-for-a-single-endpoint-1)). Set this value to `false` to ensure that your changes are not overwritten the next time the Endpoint Security server sends an updated configuration file to all of its provisioned agents. :