--- title: "Set the indicator rule aging interval using the CLI" slug: "set-the-indicator-rule-aging-interval-using-the-cli-1" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:17Z published: 2026-09-10T15:35:17Z canonical: "docs.trellix.com/set-the-indicator-rule-aging-interval-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the indicator rule aging interval using the CLI To set the indicator rule aging interval using the CLI: 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Set the indicator rule aging interval: `hostname (config) # hx server detection aging indicator generated period <seconds>` where ****** is the number of seconds for the aging period for indicator rules. The default is 1209600 seconds (14 days). Valid values range from 60 seconds to 31536000 seconds (one year). To reset this interval back to its default setting enter this command: `hostname (config) # no hx server detection aging indicator generated period` 3. Save your settings. ``` hostname (config) # write mem ``` :