--- title: "Set up IPMI port on Trellix ESM or devices" slug: "set-up-ipmi-port-on-trellix-esm-or-devices-1" tags: ["ESM"] updated: 2026-09-25T08:22:44Z published: 2026-09-25T08:22:44Z canonical: "docs.trellix.com/set-up-ipmi-port-on-trellix-esm-or-devices-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up IPMI port on Trellix ESM or devices Configure the network for the IPMI port to set up IPMI on Trellix ESM or its devices. The system must include an IPMI NIC. 1. On the system navigation tree, select the system or any of the devices, then click the **System Properties** icon ![Settings.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8b505257-d315-b266-3dba-6fbedf9e9d28(2).png?sv=2026-02-06&spr=https&st=2026-11-22T18%3A36%3A45Z&se=2026-11-22T19%3A36%3A45Z&sr=c&sp=r&sig=lO9EPYaFTdxwjqgNNRC28jIePmjtrFAfjFXl06QeDM0%3D). 2. Access the **Network Settings** **Advanced** tab. - On Trellix ESM, click Network Settings → Advanced. - On a device, click the **Configuration** option for the device, then click Interfaces → Advanced 3. Select **Enable IPMI Settings**, then type the VLAN, IP address, netmask, and gateway for the IPMI. > **Note** > > If **Enable IPMI Settings** is grayed out on device BIOS, you must update the system BIOS. SSH to the device and open the `/etc/areca/system_bios_update/Contents-README.txt` file. 4. Click **Apply** or **OK**. > **Note** > > When upgrading your device, a message might recommend that you change the password or rekey the device to configure the IPMI. :