--- title: "Set up network traffic control" slug: "set-up-network-traffic-control" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:29Z published: 2026-09-12T21:19:29Z canonical: "docs.trellix.com/set-up-network-traffic-control" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up network traffic control Define a maximum data output value for a network and mask to control the rate for sending outbound traffic. Options include kilobits (KB), megabits (MB), and gigabits (GB) per second. > ### Caution > > Limiting traffic can result in data loss. 1. From the Trellix ESM dashboard, click ![menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-19ebda16-d92c-19de-227c-dea192740a66(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A08%3A34Z&se=2026-11-22T15%3A08%3A34Z&sr=c&sp=r&sig=aG2B%2BUTVPMscDTSjZFSZcNTUfIXrkQhLSmWeQlJOK4s%3D) and select **More Settings**. 2. On the system navigation tree, select the device and click ![Settings.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8b505257-d315-b266-3dba-6fbedf9e9d28(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A08%3A34Z&se=2026-11-22T15%3A08%3A34Z&sr=c&sp=r&sig=aG2B%2BUTVPMscDTSjZFSZcNTUfIXrkQhLSmWeQlJOK4s%3D). 3. Click **Clustering**, then select the ESM. 4. Click **Settings**, then select the **Traffic** tab. The table lists the existing controls. 5. Add controls for a device. 1. Click **Add**. The **Add Outboard Traffic Control** page opens. 2. Enter the network address, mask, and throughput rate. > ### Note > > If you set the mask to zero (0), all data sent is controlled. 3. Click **OK**.