--- title: "Set up SNMP trap for power failure notification" slug: "set-up-snmp-trap-for-power-failure-notification" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:29Z published: 2026-09-12T21:19:29Z canonical: "docs.trellix.com/set-up-snmp-trap-for-power-failure-notification" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up SNMP trap for power failure notification Select an SNMP trap to notify you about hardware and DAS power failures, to keep the system from shutting down due to a power failure. - Verify that you have administrator rights or belong to an access group with alarm management permissions. - Prepare the SNMP trap Receiver (required if you don't already have an SNMP trap Receiver). 1. From the Trellix ESM dashboard, click ![menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-19ebda16-d92c-19de-227c-dea192740a66(1).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A58%3A46Z&se=2026-11-22T14%3A58%3A46Z&sr=c&sp=r&sig=KWarWyjDZsV9Qv3lK6bUu6%2FKJN491YC8IiqmOru9nio%3D) and select **More Settings**. 2. On the system navigation tree, select the device and click ![Settings.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8b505257-d315-b266-3dba-6fbedf9e9d28(1).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A58%3A46Z&se=2026-11-22T14%3A58%3A46Z&sr=c&sp=r&sig=KWarWyjDZsV9Qv3lK6bUu6%2FKJN491YC8IiqmOru9nio%3D). 3. Click **SNMP Configuration**, then click the **SNMP Traps** tab. 4. In **Trap Port**, type `162`, then select **General Hardware Failure**, and click **Edit Profiles**. 5. Click **Add**, then enter the requested information like this: - **Profile Type** — Select **SNMP Trap**. - **IP Address** — Type the address where you want to send the trap. - **Port** — Type `162`. - **Community Name** — Type `Public`. > ### Note > > Remember what you type in the **Port** and **Community Name** fields. 6. Click **OK**, then click **Close** on the **Profile Manager** page. The profile is added to the **Destinations** table. 7. Select the profile in the **Use** column, then click **OK**. When a power supply fails, an SNMP trap is sent and a health status flag appears next to the device on the system navigation tree.