--- title: "Set up Trellix ESM logging" slug: "set-up-trellix-esm-logging-1" tags: ["ESM"] updated: 2026-09-12T21:25:18Z published: 2026-09-12T21:25:18Z canonical: "docs.trellix.com/set-up-trellix-esm-logging-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up Trellix ESM logging Configure the default logging pool to send internal event data to the ELM. 1. On the system navigation tree, select **System Properties**, then click **ESM Management**. 2. On the **Configuration** tab, click **Logging**. 3. Select the default logging options and storage pool to store internal event data, then click **OK**. - If you have more than one ELM, select the ELM you want to store the data on. The Trellix ESM device logs on to the ELM you select. - Select the IP address of the ELM that you want Trellix ESM to communicate with. They system notifies you when theTrellix ESM establishes communication with the ELM. ### Note If storage pools have not been configured on the ELM, a system message instructs you to add storage pools. :