--- title: "Setting concurrent host limits" slug: "setting-concurrent-host-limits" updated: 2026-08-28T06:18:42Z published: 2026-09-08T19:11:50Z canonical: "docs.trellix.com/setting-concurrent-host-limits" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting concurrent host limits You can use concurrent host limits to set a maximum number of script-driven tasks, such as xAgent upgrades, enterprise searches, acquisitions, and triages that can run concurrently for a host set. The default number of concurrent tasks is limited to 500. However, you can use the Web UI or the API to change this number. ### Caution Concurrent Host Limits do not affect tasks that are not script-driven, such as downloads for antivirus, intelligence, and configuration. As a best practice, you should enable concurrent host limits within a custom policy that you create for your host endpoints. You can also use a custom policy to disable the concurrent host limit for selected host sets in your environment. ### Important You should only enable concurrent host limits for a small set of hosts in a constrained shared resource environment and that you configure the concurrent host limit feature globally for no fewer than 25% of your hosts. This section covers the following topics: - [Reviewing the Concurrent Host Limit Policy Settings](/docs/reviewing-the-concurrent-host-limit-policy-settings) - [Configuring the Concurrent Host Limit](/docs/configuring-the-concurrent-host-limit) ### Note The host sets to which these limits apply can only be identified using the Web UI. Prerequisites - Admin access when using the Web UI - The installed xAgent version must be version 20 or later. If an xAgent for an earlier release is included in a host set that is controlled by a policy, the policy is ignored for that xAgent. :