--- title: "Setting the alert aging interval using the CLI" slug: "setting-the-alert-aging-interval-using-the-cli" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:02Z published: 2026-08-26T19:31:02Z canonical: "docs.trellix.com/setting-the-alert-aging-interval-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the alert aging interval using the CLI **To set the alert aging interval using the CLI:** 1. Enable the CLI configuration mode: `hostname > enable hostname # configure terminal` 2. Set the alert aging interval: `hostname (config) # hx server detection aging alert period <seconds>` where is the number of seconds for the aging period for alerts. The default is 2592000 seconds (30 days). Valid values range from 0 seconds to 31536000 seconds (one year). To reset this interval back to its default setting enter this command: `hostname (config) # no hx server detection aging alert period` 3. Save your settings. ``` hostname (config) # write mem ```