--- title: "Setting the host aging interval" slug: "setting-the-host-aging-interval" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:03Z published: 2026-09-10T15:35:03Z canonical: "docs.trellix.com/setting-the-host-aging-interval" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the host aging interval You can set the host aging interval using the Web UI or the CLI. Prerequisites - Admin access ### Setting the host aging interval using the Web UI To set and enable the host aging interval using the Web UI: 1. Log in to the Endpoint Security (HX) Web UI. 2. Select **Aging Settings** on the **Configure** menu. The Aging Settings page appears. 3. In the Host Aging box on the Aging Settings page, specify an aging interval in the **Delete hosts from the database after:** box. Valid values range from 1 through 365 days. This sets and enables the aging interval. 4. Click **Save** to save your changes. ### Note To restore default settings, click **Reset to default**, and then click **Save**. If you click **Cancel**, Endpoint Security (HX) will return settings to the most recently saved values. ### Setting the host aging interval using the CLI To set the host aging interval using the CLI: 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Set the host aging interval: `hostname (config) # hx agent aging inactive-period <seconds>` where is the number of seconds for the aging period for host endpoints. The default is 7776000 seconds (90 days). Valid values range from 86400 seconds (one day) to 31536000 seconds (one year). To reset this interval back to its default setting enter this command: `hostname (config) # no hx agent aging inactive-period` 3. Save your settings. ``` hostname (config) # write mem ``` :