--- title: "Setting up HTTP servers using the Web UI" slug: "setting-up-http-servers-using-the-web-ui" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/setting-up-http-servers-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting up HTTP servers using the Web UI Use the **View and add HTTP Servers** section on the **HTTP** tab of the **Notification Settings** page to add and configure HTTP servers. To add an HTTP server: 1. Select **Appliance Settings** from the **Admin** menu. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** link in the table header. 4. Locate the **HTTP Server Listing** section. ![HX_NotifHTTPServer.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e30d7978-4e52-8d4d-6312-89181cd52cb9.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A35%3A46Z&se=2026-11-20T07%3A35%3A46Z&sr=c&sp=r&sig=XE%2Fk9koBqn7QshwHFjzJfjIszbC6IRlStNl6opHvYNY%3D) 5. Enter the name of the HTTP server that will post the notification (for example, NX7400 or HX4500) in the **Server name** box. ### Note Do not enter URLs and email addresses in the **Server name** box. 6. Select the **Enabled** checkbox to choose which servers will post HTTP notifications. 7. In the Server URL field, enter the URL of the server to post the HTTP notification in the **Server Url** box. 8. (Optional) If authentication is required for the server, select the **Auth** checkbox. If you checked the Auth checkbox, you must also enter a username and password. - Enter the user name for HTTP authentication in the **Username** box. - Enter the password for HTTP authentication in the **Password** box. 9. Select the event type or **All Events** in the **Events Notification** drop-down list box to post HTTP notifications when the specified events are detected. ### Note Selections on the **Summary** tab take precedence over your selection here. For example, if you globally disable an event type on the **Summary** tab, no alert notifications will be sent for that event type, regardless of your selection in this drop-down list box. 10. Select the delivery frequency in the **Delivery** drop-down list box: - **Per Event** (recommended)—Send a notification each time an event of this type occurs. - **Default**—Use the delivery frequency specified in the Default delivery box in the HTTP Settings area. - **Daily Digest**—Send a daily notification of specified events detected in the past 24 hours in the selected format and level of details (default is Concise). 11. **Default** is automatically selected for the delivery frequency in the **Default delivery** drop-down list box. The delivery frequency specified in the **Default delivery** box in the **Define protocol settings** section will be used. 12. (Optional) If you want to use SSL for notifications, select the **SSL Enable** checkbox and **SSL Verify** checkboxes. 13. Select a service provider in the **Default provider** drop-down list box. The default service provider is **Generic**. ### Note Trellix recommends using the generic service provider. Endpoint Security servers do not support Aruba. 14. **Default** is selected as the notification format in the **Message Format** drop-down list box. The format specified in the **Default format** box in the **Define protocol settings** section will be used. 15. Click **Update**. ### Note If you do not click **Update**, your changes are lost. To modify the HTTP server listing: 1. Select **Appliance Settings** from the **Admin** menu. 2. Click **Notifications** on the side bar. 3. In the **HTTP Server Listing** section, locate the HTTP server listing you want to modify. 4. Update the settings as needed. 5. Click **Update**. ### Note If you do not click **Update**, your changes are lost. To enable or disable an HTTP server: 1. Select **Appliance Settings** from the **Admin** menu. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** link in the table header. 4. In the **HTTP Server Listing** section, locate the HTTP server you want to enable or disable. 5. Check the **Enable** checkbox to enable the server or uncheck the **Enable** checkbox to disable the server. 6. Click **Update**. ### Note If you do not click **Update**, your changes are lost. To remove an HTTP server: 1. Select **Appliance Settings** from the **Admin** menu. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** link in the table header. 4. In the **HTTP Server Listing** section, locate the server listing you want to remove. 5. Check the **Remove** checkbox. 6. Click **Update**. ### Note If you do not click **Update**, your changes are lost. :