--- title: "Specifying the total alert maximum" slug: "specifying-the-total-alert-maximum" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:23Z published: 2026-08-26T19:31:23Z canonical: "docs.trellix.com/specifying-the-total-alert-maximum" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Specifying the total alert maximum **To specify the maximum number of alerts that the Endpoint Security (HX) appliance can process using the CLI:** 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Set the total alert maximum. ``` hostname (config) # hx server detection alert total-limit ``` where `<number>` specifies the maximum number of alert messages that can be processed by the Endpoint Security (HX) appliance. Valid values range from 0 to 1048576. The default is 1000000. If the number of alerts exceeds this threshold, the oldest alert messages are discarded. To set the alert maximum back to the default, use the `no` form of this command. ``` hostname (config) # no hx server detection alert total-limit ``` To disable this threshold, set its value to `0` (zero). ``` hostname (config) # hx server detection alert total-limit 0 ``` 3. Save your settings. ``` hostname (config) # write mem ```