--- title: "Switch high availability receiver roles" slug: "switch-high-availability-receiver-roles-1" tags: ["ESM"] updated: 2026-09-12T21:25:04Z published: 2026-09-12T21:25:04Z canonical: "docs.trellix.com/switch-high-availability-receiver-roles-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Switch high availability receiver roles Switch the roles of the primary and secondary Trellix Enterprise Security Manager - Event Receiver when upgrading a receiver, preparing to return a receiver to the manufacturer, or moving cables on a receiver. Switching roles minimizes potential data lost. ### Note If a collector (including the ePO - On-prem device) is associated with a Receiver-HA and the Receiver-HA fails over, the collector can't communicate with the Receiver-HA until the switches between the two associates the new MAC address of the failed-over Receiver to the shared IP address. This can take a few minutes or a few days, depending on the current network configuration. 1. On the system navigation tree, select the Receiver-HA device, then click the **Properties** icon ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A22%3A44Z&se=2026-11-22T18%3A22%3A44Z&sr=c&sp=r&sig=Jpic7TpOJJfaLj7baoKcMh9%2BmfTvd5Ll2Z47n350hl0%3D). 2. Select High Availability → Fail-Over. - Trellix ESM instructs the secondary Receiver to start using the shared data source IP address and collecting data. - The secondary Receiver issues a Cluster Resource Manager (CRM) command to switch the shared IP address and MAC, and starts the collectors. - Trellix ESM pulls all alert and flow data from the primary Receiver. - Trellix ESM selects the secondary Receiver as the primary and selects the primary Receiver as the secondary. :