--- title: "Testing connectivity between the on-premises appliances and cloud Endpoint Security (HX) servers" slug: "testing-connectivity-on-premises-appliances-cloud-endpoint-security-3" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T21:18:41Z published: 2026-09-10T21:18:41Z canonical: "docs.trellix.com/testing-connectivity-on-premises-appliances-cloud-endpoint-security-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Testing connectivity between the on-premises appliances and cloud Endpoint Security (HX) servers To test connectivity between the on-premises Endpoint Security (HX) appliances and cloud Endpoint Security (HX) servers using the CLI: 1. Log in to the on-premises Endpoint Security (HX) appliance using the SSH protocol and the IP address or hostname of the appliance's management interface. 2. Enable CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 3. Telnet to the cloud Endpoint Security (HX) server on port 80: ``` hostname # telnet 80 ``` where `<hostname-or-IPaddress>` is the host name or public IP address of the cloud Endpoint Security (HX) appliance. 4. In the output from this command, verify that telnet succeeds in making a connection. ``` Trying ... Connected to . Escape character is '^]'. ``` 5. Repeat these steps with the on-premises HXD (DMZ) appliance, if there is one. :